![]() ![]() Any points that have any of the reserved classification values will also be colored in a single color. Any points that have any of the user-definable classifications value will be colored in a single color. ![]() If more than one standard ASPRS classification value (defined in the LAS Specification Version 1.4 - R11) is present in the input file, click the Color by Classification toolbar button to color points by their classification values. The two modes cannot be applied at the same time, but you can toggle between them. If distinct values for both RGB and intensity are present in the input file, use the Color by RGB and Shade by Intensity toolbar buttons to toggle between the two modes. If the input file does not have distinct values for intensity or RGB, then coloring is applied by height.Note: Intensity is also affected by the Intensity Range Min/Max settings in the Production Parameters tab. If distinct values for intensity are present in the input file (that is, the intensity values are not all the same), then coloring (or shading) is applied by intensity and height. If distinct values for RGB are present in the input file (that is, the RGB values are not all the same), then coloring is applied by RGB.When you create a new project or open an existing one, ENVI LiDAR determines how the points and DSM are initially colored or shaded in the standard view as follows: The differences between the standard view (when QA Mode is not enabled) and the QA Mode view are described below. If you hide the all Points layers in the ENVI LiDAR Layer Manager, the DSM displays only intensity or RGB.ĮNVI LiDAR may apply point coloring or shading differently if QA Mode is enabled. You can show or hide the layers of a Color by mode by enabling or disabling the check boxes in the ENVI LiDAR Layer Manager. ![]() Use the Color by Height, Color by Classification, Shade by Intensity, and Color by RGB toolbar buttons to toggle point coloring on and off. Based on the format of the input file, point cloud and DSM layers can be colored or shaded by the following: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |